On April 7, 2024, the State Administration for Market Regulation issued Announcement No. 9 of 2024 regarding the implementation of mandatory product certification management for commercial gas combustion appliances and other products. To further strengthen the supervision ...

　　The GB21520-2023 "Limits and Grades of Energy Efficiency for Displays" released on May 23, 2023, will come into effect on June 1, 2024 and replace the GB21520-2015 (the old standard). At the same time, the China Quality Certification Center (abbreviated as CQC) has revised...

On March 27, 2022, CENELEC in Europe released the radiation safety standard for laser products, EN 50689:2021 "Safety of laser products - Particular Requirements for Consumer Laser Products". The new standard came into effect on September 27, 2022 and will be mandatory aft...

　　Recently, the Saudi Standards, Metrology and Quality Organization (SASO) published the EMC (Electromagnetic Compatibility) technical regulations in the official gazette on November 2023. The implementation date is May 17, 2024.　　This technical regulation will cover all EM...

I. Introduction to RCM Certification in Australia and SAA/C-Tick Certifications 1. Australian RCM Certification RCM (Regulatory Compliance Mark) is a registration mark that indicates that the supplier has declared that the product complies with the electrical safety laws/regulati...

Before the silicon wafers enter the CMOS manufacturing process, their surfaces must be cleaned to remove any adhered particles and organic/inorganic impurities, as well as the natural oxide of silicon. The constantly shrinking chip design makes cleaning technology increasingly im...

　　SDoC, which stands for Supplier's Declaration of Conformity, is a test conducted by the equipment supplier to verify that the equipment complies with the specified standards or requirements. Equipment that meets the requirements must provide relevant documents (such as...

加拿大电子产品要求IC认证（ISED）指南IC is the English abbreviation for Industry Canada, the former name of the Canadian Ministry of Industry. It stipulates that wireless products sold in Canada must obtain the certification from the IC. Therefore, IC certification serves as the passp...

There are currently two versions of the FCC Logo. Which one should be used? How should it be used? Is the previously used version still valid? Today, let's take a look at the correct usage requirements for the FCC LOGO. ？QHas there been any new change to the FCC logo currently...

EN ISO 12100:2010 Mechanical Safety - General Principles of Design - Risk Assessment and Risk Reduction was officially released on April 8, 2011. The European Technology Committee issued a notice stating that this standard must be incorporated or referenced as the national standa...

The required documents for FCC ID certification and the process of applying for the first FCC FRN, as well as how to register the Grandee code1.Applicant’s Product Name ,Model NO., Mailing Address , Phone No.,Fax No., Contact Person & His Title。Applicant's name, product nam...

The mission is to assess the safety and effectiveness of medical devices before they are launched onto the market, and to ensure their safety after they are on the market. The public health goal is to enable patients and healthcare providers to have timely and continuous access t...